- Shangchai generator set
- Cummins generator set
- Yuchai generator set
- Weifang Diesel Generator
- Gasoline generator
- Single-cylinder diesel engine
Contact Songge Mechanical
Cummins generator set-Yuchai generator set-Silent diesel generator-Guangzhou Songge Mechanical and Electrical Co., Ltd.
020-84851836 Consulting Hotline: 020-84851836
曹先生 Contact: Mr. Cao
13609022338 Mobile: 13609022338
020-34865288 Fax: 020-34865288
email@example.com Email: firstname.lastname@example.org
广东省广州市沙湾镇大涌口第二工业区1号 Address: No. 1 Second Industrial Zone, Dayongkou, Shawan Town, Guangzhou City, Guangdong Province
Method for connecting ground wire of diesel generator set
In order to use the diesel generator set more safely, when the generator set is used, it is necessary to connect the ground wire. So what is the way to connect the ground wire? Let's follow the editor to understand it in detail.
A good ground for a diesel generator should have:
1) Has low resistance to .1 h lightning and short circuit.
2) The ability to repeatedly drive large currents.
3) The ability to perform any function during installation without any changes.
Cummins diesel generator system ground
This is used to describe the way the generator system is connected to ground. Installations have not only general ground connection, but also non-grounded installations such as offshore. When the HV unit is used on land, it should be grounded and insulated with the same conductor.
Method for connecting electrical equipment to ground based on safety factors (Mu Wenyu's meaning of protective conductor refers to a closed circuit device). Connect the following equipment during installation:
1) Exposed uncharged but possibly charged foreign body.
2) Small energy can form an electrical system, but may be due to the capacitance effect; V: a conductor that affects each other.
3) The main circuit node.
4) Ground electrode.
5) Ground point of the supply source.
6) The joint body is used to prevent potential danger between grounded metal objects and other equipment such as water and gas pipelines. This method can avoid the danger of setting the appliance because the foreign body and other metal objects are too close. It can minimize the loss caused by the current shock.
The above are the methods and requirements for the ground connection of the diesel generator set shared by us. I hope it can help us understand the diesel generator set better.